<link rel="stylesheet" href="styles.f3b1fba60ec7970c.css">

EFEITO DA CIS-13-DOCOSENAMIDA NA MORFOLOGIA E NAS PROPRIEDADES MECÂNICAS, TÉRMICAS E DE INFLAMABILIDADE DE SISTEMAS PP/ARGILA ORGANOFILICA/ COMPATIBILIZANTES

Carregando...
Imagem de Miniatura

Título da Revista

ISSN da Revista

Título de Volume

Editor

DOI

Resumo

RESUMO: Neste trabalho foram preparados nanocompósitos de polipropileno (PP) e montmorilonita organofílica (OMMT), utilizando polipropileno graftizado com anidrido maleico (PP-g-MA) como agente compatibilizante e erucamida como agente co-intercalante. Os nanocompósitos foram preparados através do método de intercalação no estado fundido em uma extrusora monorosca. A influência das concentrações do PP-g-MA e da erucamida foram avaliadas por difração de raios X (DRX) visto que o nível de intercalação e/ou esfoliação é aumentado com a elevação das concentrações dos aditivos, por microscopia óptica (MO) foi observado uma boa dispersão da argila no PP, nos ensaios mecânicos não se obteve aumentos significativos, no Infravermelho por Transformada de Fourier (FTIR) foram observadas as bandas características dos componentes que formam os nanocompositos e suas possíveis interações, a análise termogravimétrica (TGA) confirmou uma maior estabilidade térmica para todos os nanocompósitos frente ao PP puro, a calorimetria exploratória diferencial (DSC) mostrou um aumento da temperatura de fusão para todos os nanocompósitos, no teste de inflamabilidade horizontal houve um aumento nas velocidades de queima dos sistemas com relação ao polímero puro e pela microscopia eletrônica de varredura (MEV) foi visualizado a formação da camada carbonácea para todos os nanocompósitos, além, da matriz polimérica que se manteve em parte preservada. Os sistemas com menor e maior porcentagem de argila, PP-g-MA e erucamida obtiveram melhores resultados frente a todas as caracterizações. ABSTRACT: In this work we were prepared polypropylene (PP) nanocomposites and organophilic montmorillonite (OMMT) using maleic anhydride grafted polypropylene (PP-g-MA) as a compatibilizing agent and erucamide as co-intercalant agent. The nanocom posites were prepared by the method of intercalation in the melted state at a single screw extruder. The influence of PP-g-MA and erucamide concentrations were evaluated by X-ray diffraction (XRD) whereas the level of intercalation and / or exfoliation is increased with the elevation of additive concentrations, by optical microscopy (OM) where there was a good dispersion of clay in PP, in the mechanical tests was not obtained significant increases, fourier transform infrared spectroscopy (FTIR) were observed bands characteristics of the components that form the nanocomposites and their possible interactions, thermogravimetric analysis (TGA) confirmed a higher thermal stability for all nanocomposites front of the pure PP, differential scanning calorimetry (DSC) showed that an increase in melting temperature for all nanocomposites, the horizontal inflammability test there was an increase in the burning rates of the systems with respect to pure polymer and by scanning eletron microscopy (SEM) visualizing the formation of a char surface layer for all nanocomposites, in addition, the polymer matrix which remained preserved in part. Systems with lower and higher percentage of clay, PP-g-MA and erucamide obtained better results front of all characterizations.

Descrição

Orientadora: Profa. Dra. Tatianny Soares Alves. Examinadora interna: Profa. Dra. Renata Barbosa. Examinadora externa: Joyce Batista Azevedo (CIMATEC-BA).

Citação

Avaliação

Revisão

Suplementado Por

Referenciado Por